2018 ~ 52 ring challenge - week 3

Ok- this has been a frustrating week. I was supposed to go out of town for the 3-day weekend and spend some time communing with nature. I need it. I need to get down and take up close photos of turkey tails growing on fallen logs, bark textures from bare trees, black reaching branches silhouetted against a crisp blue winter sky. Unfortunately, mother nature had something else in mind and instead of heading out Friday night after work (Saturday morning if I was too tired), I worked from home Friday as I was iced in. I was outside trying to scrape the ice off my car when I watched a much larger, heavier vehicle go sliding through the intersection down from my house. After over 30 minutes of working on my car, and I still couldn't see through the windshield, I gave up. In time to watch another car go sliding past my house and fishtail as they tried to pull into the driveway across from me. I decided NAH..

So.. I was stuck at home. I made it out on Monday and wandered the gardens to get a little bit of nature (and I did at least get a few photos of cool textures and the Big Bugs were still out) And thankfully I worked some studio time in.

Unfortunately, snow moved in again and we got some serious little drifts here at the house. The street was completely covered and I again, enjoyed/cringed-at the sound of cars sliding down my street as I worked from home again today.

Week 3's rings:
1st set were technically done at the end of week 2 as I forgot I was doing this from Monday to Sunday- two men's bands done in 16 gauge sterling silver. they're high polished and quite shiny.

And the other 2-

Ring 1- Bronze cast piece (leaf impression) on hand stamped sterling rectangle band

Ring 2- Unicorn creations Dichroic glass satin finished bead, torch pinned in a sterling silver stamped 16 gauge U band. The bead (and two sterling side beads) spin around in the setting and the bead is reversible with lovely flashes of purple on both sides. The wire that holds it in the U frame was balled up with the bead in place with my Little Smith torch- I think this is the first time I've successfully pinned something with wire this thick.

And because I'm not *just* making rings in 2018, here are some other pieces I've made this year:

Small sterling nebula pendant. It's reversible. I'm trying to decide if I like it shiny or if it needs some patina.

Sterling and Bronze pendant- currently unnamed (but leaning towards Shattered).

The back is as fun as the front. The bronze bits are held in place by oversize textured prongs.

Creative Life 2016- week 15 part 2

Spring is in the air and i've had monkey brain most nights, leaving me groggy in the morning and grumpy in the early afternoon.

However, since the night time is my-time, i have been getting some work made and i have a slew of sketches that i can't wait to get started on. I'm trying to make work in cohesive 'collections' now, for a few reasons-- 1- it makes my work easier to display as things go together and make sense instead of being a visual testament for my artistic ADD and 2- it makes it easier for me to enter into competitions, scholarship opportunities, etc because my work makes sens to a juror, judge, etc.

I'm still focused on my fold formed pieces, but i've branched out into enameled fold formed pieces over the past year and now i'm adding enameled beads to my fold formed focals. this lets me pull my enamel only work seamlessly into my current offerings also.

I'm really wanting to get back to my enamel 'sketch' work- where i actually draw on the enamel with a graphite pencil and fire it all together to create a permanent 'doodle' on jewelry. i have a giant focal i did almost 2 years ago that i love, along with my smaller pendant pieces, and i think there's some great possibilities for me there- both in the finished work and in the artistic process.

The other 'line' i'm working on is a narrative set of pendants inspired by words from http://other-wordly.tumblr.com/. The first in the series is Werifesteria (to wander longingly through the forest in search of mystery) and has a dendrite stone as its focal.

Here's what i finished last night- it's the only one i have right now in silver. While i love copper and i love working in copper, i love silver too, and sometimes something a little fancier is needed. :) the chain is random lengths of this lovely twisted figure 8 link connected by hand wrapped links with tiny labradorite. The focal is dauphine and harvest blue enameled pieces with organic wrapped sterling bits and a big chalcedony tear drop (i've had these in my stash for *years*- they were one of my first big splurges- i paid more for the strand than i was normally spending on a whole order of other beads. I've slowly been adding them to special pieces and this was a match made in heaven!)

Don't forget to come by and see me at the East Buntyn art walk this Saturday from 1pm-6pm! The commemorative glass this year is a pretty red and once you buy the glass at headquarters, you can get pours from all the artists around the neighborhood as you browse and buy one-of-a-kind art!

Weekly challenge- Week 25

this week's piece came together very quickly and exactly like i had hoped (very close to the sketch i made on Monday). I bravely assembled a 3 inch by 3 inch sheet of 24 gauge sterling silver, 18 inches of 12 gauge sterling square wire, fine silver bezel wire, 26 gauge sheet, a Wild Horse Canyon agate cab and a dark aqua larimar cab into a statement neck piece.

The forming of the metal was finished in one 3-4 hour session and it would have been completely finished in less than an hour more except my perfectionism kicked in and i tried to 'fix' something that no one would have ever noticed and made another 4 and a half hours of work for myself, cleaning up the damage i did. Check out the progress pictures below with the finished piece down at the very bottom.. I'm wearing it today to try to make adjustments to the neck wire for comfort. I think the wire will need to be trimmed a bit as the ends overlap now that i've put bends in it for the collar bones.  It is very comfortable so far - the air chased piece is extremely light (but super strong) and the 12 gauge square is a very comfortable size, especially since i took some 500 grit sandpaper and rounded the edges a just little.

The finished piece.. now to decide if i will oxidize or not.. 

Weekly challenge - week 23 - birthday week!!!

I've started this week off right! New Knew concepts  saw and three Fretz  hammers for my birthday were enough to inspire me to stop hoarding the tiny geodes I bought for rings (like 3 or so years ago!!) And make some stuff.

I had to flatten out a spot on the backs of the halves, 1 to make them easier go set and 2 so some weren't quite so tall. I ground down 5, my goal is to get them all finished this week. :)

My first layout for MCT is completed and approved. Pretty exciting! I'm also taking over as treasurer for TN crafts SW- thrilled to be even more a part of an organization that does so much for artists and craftspeople across the state. Things are moving along well on the brandy is an artist front. :) now if I could just get that bus going!!!

Mobile Metal Working Studio

Last week i set up a GoFundMe for a VW bus that i can use to go to out of town art shows and also have a mobile metal studio for said shows as well as local events. I'm so thrilled at the support i have received so far but i still have a ways to go to be able to purchase and transport the bus from Cali.

I've created a logo for the MMWS and i'm already pricing how much it's going to take to get this thing on the road and to shows! (Positive thinking-- especially since the seller has lowered the price if i can get it off his hands this week!!!)

Rough draft of the logo- needs a little polish, i know.

Here's the link to the GoFundMe page- every little bit helps and i do have rewards for donations- I'm not just asking people to just give me money for an art project- I'm offering product in exchange for an investment in my community outreach plan.

Here's a picture of the high top camper VW Bus- it'll need a new paint job eventually, but it will do until i can get the inside outfitted to be useful. i think i'll paint her to match my studio. :)

Weekly jewelry- week 6.5

I'm to be completely out of pocket for a week with out the ability to make jewelry so i am getting a little ahead (I don't want to fall behind like I did last year)

these earrings are textured copper with sterling silver bezel cups and posts with onyx set in the bezels.

Jewelry a week - Week 3

It was ring making day at the studio. I sat and did a pseudo- assembly line and created 4 of my open rings in silver, 2 ball stackers, and 5 gemstone stackers.

The gemstones are 1 smooth moonstone, 1 rose cut, 1 rose cut labradorite,  a small oval larimar and a lab Opal doublet.